Cabinets For The Various Models - Ingecon Sun 250 M220 Indoor Installation Manual

Installation manual

4.5. cabinets for the various models

IngecOn Sun PowerMax units comprise 2 to 4 cabinets:
A (DC)
• cubicle A: Dc module
• cubicle B: power module 1-2
• cubicle c: power module 3 or power module 3-4
• cubicle D: Ac Module
The table below indicates which cabinets each model includes:
250 M220 Indoor, 315 M275 Indoor, 365 M320 Indoor, 400 M345 Indoor, 420 M360 Indoor
375 M220 Indoor NAC, 500 M275 Indoor NAC, 550 M320 Indoor NAC, 600 M345 Indoor NAC, 630
M360 Indoor NAC
375 M220 Indoor, 500 M275 Indoor, 550 M320 Indoor, 600 M345 Indoor, 630 M360 Indoor
500 M220 Indoor NAC, 625 M275 Indoor NAC, 730 M320 Indoor NAC, 800 M345 Indoor NAC, 840
M360 Indoor NAC
500 M220 Indoor, 625 M275 Indoor, 730 M320 Indoor, 800 M345 Indoor, 840 M360 Indoor
It is strictly forbidden to gain access to the inside of the electrical panel through any other point than
the access cover provided for the purpose. Opening any of the enclosure covers and/or accessing
them (from the side, rear or top) triggers a general shutdown of all power to the panel (PV array,
3-phase feed and auxiliary single-phase feed). Always access when the unit is voltage-free.
Any work carried out which implies a modification of the original electrical settings must be proposed
to and accepted by Ingeteam.
Below are the obligatory safety standards and the various tasks that may be performed in the various cubicles.
AAV2000IKI01
B
1 2
Model
C
3 4 D (AC)
Ingeteam
cubicles
Cubicles A, B and D
Cubicles A, B and C
Cubicles A, B, C and D
Cubicles A, B and C
Cubicles A, B, C and D
31