Installation manual
2.1.8. Environmental characteristics
The environmental conditions for operation are:
Temperature at which power limiting commences
Maximum relative humidity without condensation
Units including a heating element kit may be installed in locations with a minimum temperature of -13 °F (-25 °C).
(1)
For further information see Chapter "2.4. Location of the components".
2.2. Characteristics of the electrical installation
These units are designed to be connected to the low voltage public grid.
2.3. EMC requirements
These units are equipped with the necessary filtering elements to comply with EMC requirements for industrial appli-
cations in order to prevent disturbances in other equipment outside the installation.
2.4. Location of the components
See next pages.
ABB2000IKI01
Ambient conditions
Minimum temperature
Minimum surrounding air temperature
Minimum surrounding air temperature
-4 °F (-20 °C)
(1)
-4 °F (-20 °C)
(1)
149 °F (65 °C)
122 °F (50 °C)
Ingeteam
95%
19