Step 2 Select An Input Signal; Types Of Input Signals - Canon WUX6000 User Manual

Select an Input Signal
Step 2
Select the input signal in the [Input] menu when you want to project a digital PC or
AV equipment signal, or to switch between inputs when multiple computers or
multiple sets of AV equipment are connected.
Skip this step if you have not changed the input signal since the last projection.

Types of Input Signals

The table below shows the relationship among input signals supported by the
projector, input terminals and connection cables.
Input signal
HDMI
Digital PC
Analog
PC-1
Analog
PC-2
Component
LAN
USB
Downloaded From projector-manual.com Canon Manuals
Input terminal
/COMPONENT IN
/COMPONENT IN
Mini D-sub 15-pin - BNC
terminal converter cable
(not included)
/COMPONENT IN
LAN
USB
Connect a USB flash drive. (P65)
Types of connection cables
HDMI cable (not included)
DVI cable (not included)
DVI-D-sub 15 cable (not included)
Computer cable (supplied)
BNC cable (not included)
Component cable (not included)
D terminal plug - RCA plug
component conversion cable
(not included)
RCA plug - RCA plug
component cable (not included)
LAN cable (shielded twisted pair) (not included)
39
BNC cable
(not included)