Canon WUX6000 User Manual page 134

Connection Procedure
• Use an audio cable without a built-in resistor. Using an audio cable with a built-in
resistor will reduce the audio volume.
• The AUDIO IN terminal can be changed in the Audio in terminal select screen (P106).
■ Connecting with an HDMI cable
Computer
Digital video output
terminal
(HDMI Terminal)
■ Outputting Audio to Speakers
It is possible to output audio from the projected images to amplified speakers.
Projector
To AUDIO OUT terminal
• Use an audio cable without a built-in resistor. Using an audio cable with a built-in
resistor will reduce the audio volume.
Downloaded From projector-manual.com Canon Manuals
HDMI cable (not included)
* When an HDMI cable is connected,
digital audio is also connected at the
same time.
Audio cable (not included)
(Input signal type: [HDMI] P39)
To HDMI terminal
134
Projector
Speaker
RCA terminal
Mini jack
AUDIO IN terminal
(AUDIO IN)