Restoring Original Gamma Settings - Canon WUX6000 User Manual

Restoring Original
Gamma Settings
> [System settings] > [Other settings] >
[Gamma restore]
HDMI
Digital PC
This function is used when changing
and turning of the tone
characteristics and achromatic color
is noticed over a long period of time.
Gamma restore can only be used
when the lamp has been on for
approximately 30 minutes or longer.
Off Returns to the factory default without
performing Gamma restore.
Adjust Performs Gamma restore and applies
the result.
OK
Cancel Gamma restore is not
• If Gamma restore is performed, the
adjustment screen will be projected for
approximately 150 seconds.
• To stop Gamma restore, press the POWER
button.
Downloaded From projector-manual.com Canon Manuals
Customizing System Operation (System Settings)
Component
Analog PC
Gamma restore is performed.
performed.
If Gamma restore is performed, the
tone characteristics and achromatic
color will be restored as close as
possible to the condition when the
projector was purchased, however it is
not possible to restore it completely to
the original condition. So the changing
LAN
and turning color cannot be eliminated
USB
completely.
107