Reducing Image Noise (Mosquito Noise Reduction); Dynamic Gamma Adjustment - Canon WUX6000 User Manual

Reducing Image
Noise
(Mosquito noise reduction)
> [Image adjustment] > [Advanced
adjustment] >
reduction]
HDMI
Digital PC
You can reduce mosquito noise.
Off Disables mosquito noise
reduction.
Weak Specifies the intensity of the
Middle mosquito noise reduction in three
Strong steps.
Press the OK button to accept your
setting and then press the MENU
button.
• [Off] is the factory default.
• Image resolution may seem lower when
noise reduction is applied.
• The adjustment you have made is stored as
adjusted values for the input signals and
image mode of the current projection.
• This setting is not displayed for the
following input: HDMI, Digital PC, Analog
PC-1, Analog PC-2, or Component.
Downloaded From projector-manual.com Canon Manuals
Adjusting Image Quality (Image Adjustment)
[Mosquito noise
Component LAN
Analog PC USB
Dynamic Gamma
Adjustment
> [Image adjustment] > [Advanced
adjustment] >
HDMI
Digital PC
You can adjust the gradation
representation of light and dark
portions of an image automatically.
Off Dynamic gamma is disabled.
Weak Specifies the intensity of the
Middle dynamic gamma in three steps.
Strong
Press the OK button to accept your
setting and then press the MENU
button.
• The factory default settings are as follows.
- For HDMI (when [HDMI In] (P108) is
[Computer]), Digital PC or Analog PC,
USB, or LAN, the factory default is [Off].
- For HDMI (when [HDMI In] (P108) is set
to [Auto]) and Component, the default
setting is [Weak].
• The adjustments you have made are stored
as adjusted values for the input signals and
image mode of the current projection.
91
[Dynamic gamma]
Component LAN
Analog PC USB