Canon WUX6000 User Manual page 187

Setting PJLink [PJLink]
From [PJLink] in the settings screen, you can set the PJLink functions which are the
standard for projector management on a network. For the setting procedure, refer
to "Network Setting" (P179). For information about PJLink, refer to "What is
PJLink?" (P171).
PJLink
PJLink authentication
Password
Confirm password
Setting Up a Controller Manufactured by Crestron Electronics
[Crestron Controller]
The [Crestron e-Control] screen will open. For details on the Crestron Controller,
visit the Crestron website.
http://www.crestron.com/
Downloaded From projector-manual.com Canon Manuals
Item
Turn the PJLink function on or off. If
OFF is selected, the PJLink function
will be turned off and the other settings
in this screen cannot be changed.
Select whether to turn the PJLink
authentication function on or off. If OFF
is selected, [Password] and [Confirm
password] cannot be changed.
Enter the PJLink authentication
password in 1-byte alphanumeric
characters (1 - 32 characters).
For confirmation, enter the same
password that you entered in
[Password].
Completing Computer Settings
Explanation
187
Factory default
setting
ON
ON
system
system