Connecting A Computer - Canon WUX6000 User Manual

Connection Procedure

Connecting a Computer

Connect the projector to the computer.
A digital connection (P133) is recommended when projecting an image in high
quality.
When using a computer with an HDMI output terminal, a digital connection (P134)
can be made using an HDMI cable.
Before connecting the cables, turn off both the projector and computer.
■ Connecting to RGB Monitor Output Terminal (Analog
Connection)
Connecting with a computer cable (Input signal type: [Analog PC-2] P39)
Computer
Monitor output terminal
(Mini D-sub 15-pin)
AUDIO output terminal
(AUDIO OUT)
Connecting with DVI-D-sub 15 cable (Input signal type: [Analog PC-1] P39)
Computer
Monitor output terminal
(Mini D-sub 15-pin)
AUDIO output terminal
(AUDIO OUT)
Downloaded From projector-manual.com Canon Manuals
Computer cable
(supplied)
When inputting corresponding audio
Audio cable (not included)
DVI-D-sub 15 cable
(not included)
When inputting corresponding audio
Audio cable (not included)
132
Projector
To ANALOG PC-2 /
COMPONENT terminal
To AUDIO IN terminal 2
Projector
To ANALOG PC-1 / DVI-I terminal
To AUDIO IN terminal 1