Table of Contents
Advertisement
shock. Check the power cord from time to time. Should it become
damaged contact our customer service centre to have it replaced.
Keep any flammable material away from the unit while it is operating.
X
Otherwise you run the risk of causing a fire.
Always use appropriated lighting safety cables when hanging lights and
X
effects overhead.
In the event of serious operating problem, stop using the unit
X
immediately. Never try to repair the unit by yourself. Repairs carried out
by unskilled people can lead to damage or malfunction. Please contact
the nearest authorized technical assistance centre. Always use the
same type spare parts.
WARNING!
X
There are no user serviceable parts inside the unit. Do not open the
housing or attempt any repairs by yourself. If the fixture shows any visible
damage or if your unit may require service, please contact your dealer.
NEVER use the unit under the following conditions:
X
> In places subject to vibrations or bumps.
> In places with a temperature of over 40 °C or less than 10 °C.
> In places subject to excessive dryness or humidity (ideal conditions
are between 35% and 80%).
This appliance must not be used by individuals (including children) with
X
restricted physical, physiological or intellectual abilities or deficiencies in
experience and/or knowledge unless they are supervised by a person
responsible for their safety or receive from this person instruction in how
the appliance is to be used. Keep children away from the device and
power cord!
Do not switch the fixture on and off in short intervals as this would
X
reduce the laser diode life.
If the device has been exposed to drastic temperature fluctuation, do
X
not switch it on immediately. The arising condensation water might
damage your device. Leave the device switched off until it has reached
room temperature.
Every person involved with installation, operation, and maintenance
X
of this device has to be a qualified technician and has to follow the
instructions of this manual.
Laser safety information
This information is based on DIN EN 60825-1.
This device is a class 3B laser product. It is equipped with a safety key.
Always remove the key when the device is not operated by trained
personnel.
4
DJ LASE ColorStar 500 RGB
Advertisement
Table of Contents
