Table of Contents
Advertisement
Proper laser set up & usage
This fixture has been designed to be hung. It is recommended for safety
purposes, that your lighting effects are properly mounted using a suitable
hanging clamp and safety cable. Items appropriate for safe and effective
mounting are easily sourced from your lighting vendor.
International laser safety regulations require that lasers must be operated
in the way illustrated below, with a minimum of 3 meters (9.8 ft) of
vertical separation between the floor and the lowest laser light vertically.
Additionally, 2.5 meters of horizontal separation is required between laser
light and audience or other public spaces.
Installing the fixture
Please consider the respective national norms during the
installation! The installation must only be carried out by an
authorized employee or dealers!
The installation of the fixture has to be built and constructed in a way
X
that it can hold 10 times the weight for 1 hour.
The installation must always be secured with a secondary safety
X
attachment, e.g. an appropriate catch net. This secondary safety
attachment must be constructed in a way that no part of the installation
can fall down if the main attachment fails.
Make sure the area below the installation place is free from unwanted
X
persons during rigging, de-rigging and servicing.
The operator has to make sure that safety-relating and machine-
X
technical installations are approved by an expert before the laser device
is taken into initial operation and after changes have been done. This
approval has to be repeated once a year.
www.thomann.de
7
Advertisement
Table of Contents
