Stairville ColorStar 500 RGB Owner's Manual page 16

SLAVE MODE
Press FUNC button, until the LED panel shows "SLA".
X
Press ENTER to confirm the setting
X
The laser is working in "SLAVE MODE". Connect MASTER laser with
several SLAVE laser with DMX cable, the SLAVE lasers do what exactly
the MASTER laser does. Please check the section "DMX-512 connection
between fixtures" to have more details about laser connection.
PATTERN MIRROR REVERSE SETTING
Press FUNC button, until the LED panel show any one of
X
.
Press UP or DOWN to select pattern mirror mode as above.
X
Press ENTER to confirm the setting.
X
In the MODE OPTION setting, the pattern mirror mode that you are
going to choose is flashing. Press UP or DOWN to change pattern mirror
mode, you will have 4 different pattern mirror modes. Their DISPLAY and
OUTPUT are listed below:
16
DJ LASE ColorStar 500 RGB
, , ,