Table of Contents
Advertisement
In the MODE OPTION setting, the stand alone laser show that you are
going to choose is flashing. Press UP or DOWN to change stand alone
laser show, you will have 4 different stand alone preprogrammed laser
show. Their DISPLAY and EFFECT are listed below:
DISPLAY
Attention:
In S1 or S2 MODE (Sound Activated Mode), the laser will
be blocked out in 3 second when MIC Signal was not
detected.
DMX Mode
Press FUNC button, until the LED panel shows "001".
X
Press UP or DOWN to select the DMX 512 address among 001-512.
X
Press ENTER to confirm the setting
X
The laser is working in DMX MODE. With help of UP and DOWN button,
the DMX address could be set.
Attention:
In DMX MODE, once the DMX cable is connected with
laser and DMX controller, the DMX LED in front panel of
laser will be ON.
STAND ALONE MODE LASER EFFECT
A1
Auto laser show with random order
A2
Auto laser show with traditional order
S1
Sound activated laser show with random order
S2
Sound activated laser show with traditional order
www.thomann.de
15
Advertisement
Table of Contents
