Koncar SE 5040/BH0 Operating And Installation Instructions page 73

Possible cooker tilting could be prevented by special holder, shown on Figure 10 , which is
supplied in Accessory Kit furnished with the cooker.
Connection to the power supply
Make sure that the electrical cabling to the point where the cooker will
be connected is adequate to support the required power consumption.
230 V~ 50Hz
Connection : Single phase
Connecting cable :
2
3x2,5 mm
* Limitated work of the oven
and only one heating plate or
work of only two heating
plates.
The cookers bearing the marks SE5040 are for connection to three phase (Figure 13) power
supply, but the connection to two-phase (Figure 12) and single-phase (Figure 11)
400 V 2N ~ 50Hz
Connection : Two-phase
Connecting cable :
*
Figure 11
EN
60x60
50x60
1 - Wall
2 - Working elements
2
4x2,5 mm
Figure 12
73
PRODUCT
A
MODEL
59,5
85 cm product
mm
55,5
90 cm product
mm
400 V 3N ~ 50Hz
Connection : Three-phase
Connecting cable :
2
5x1,5 mm
B
61
mm
55,5
mm
Figure 10
Figure 13