Installation Instructions - Koncar SE 5040/BH0 Operating And Installation Instructions

If it does not have the original case :
Take measure for the external surfaces (glass and painted surfaces) of oven against possible
blows.
GENERAL
The connection of the cooker to power and gas supply shall be
performed only by authorised and qualified persons. The user may
perform only the operations for which no tools are required.
The electrical cookers have been tested and certified in accordance with European regulations
for household appliances.
Details such as type, serial number and electric power are shown on
the label applied on the side panel of the cooker, which is visible
when the oven door are open.
COOKER POSITIONING
Natural discharge of combustion products shall not be compromised by any restrictions.
If the cooker is to be installed on a movable support, make sure that it is stable enough to
prevent its displacement. When installed in a row, the appliance may be in contact with
adjacent kitchen units on both sides. On the other side, only a kitchen element of equal height
as the cooker may be installed. The adjacent surfaces and cabinet walls (floor, back kitchen
wall, side walls) shall be resistant to temperatures of at least 90
at least 2cm blank space between the back cover of oven and wall for air circulation.
Vertical distance between the cooker and the hood shall be 65cm or at least as specified in
the hood installation instructions.
EN

INSTALLATION INSTRUCTIONS

In certain cooker models, proper vertical and
horizontal position of the cooker side panels
and cooking plate can be adjusted by screwing
or unscrewing adjustable feet installed on the
bottom of the cooker (Figure 9).
Figure 9
72
o
C. It is required there must be