Flash Upgrades - CYBEX autoview 200 Installer And User Manual

AutoView 200 Installer/User Guide
4. Choose the 'Name' heading and enter the name for this user.
5. Choose the 'Password' heading and enter the password and confirm it
6. Choose the 'Logout Time' heading. Enter a value in minutes for this
7. Choose the 'Access Setup' heading. Here, you will see a listing of all
8. Press Enter to accept your selections and repeat steps 3-7 for each
Setup Port Operations
Cybex offers enhancement products that allow you to customize the
AutoView 200 through the setup port. Features include automated OSD
programming via the OSD Configuration Utility and FLASH Upgrades.
Depending on the application, you may be asked to enable the setup port
in the instructions that come with your AutoView enhancement.

FLASH Upgrades

FLASH Upgrading allows you to change the code that runs your AutoView
200. This lets you enhance the features of your switch and keep it current
with the latest improvements in KVM switching.
For more information, see Appendix B.
for this user. (Passwords are not case sensitive.)
user's logout time. A value of 0 keeps the user logged on continuously;
60 is the maximum setting. The default is set for 5 minutes.
attached servers in the channel list. For each server, choose a level of
access for this user by selecting one of the function keys listed on the
screen: F5 for no access, F6 for video only or F7 for video and keyboard/
mouse capability. The default is set for full access. All changes go into
effect as soon as they are made. Press Enter when you have completed
your configuration.
remaining user.
24