CYBEX autoview 200 Installer And User Manual page 27

4. Press Enter to accept the changes or press Esc to exit the menu
without saving the changes.
Setting the ID Window Dwell Time
This menu selection lets you set the time that the ID Window remains on
screen after a channel switch. Each channel can be configured
independently. The default time is set for five seconds.
1. Highlight the channel you wish to change in the main OSD Window.
2. From the main OSD Window, press the Control key twice to access the
Administrator Command Menu.
3. Select 'Edit Channel' from the Command Menu.
4. Choose the option 'ID Dwell Time'.
5. Enter a number between 0-255 seconds. Entering 0 disables the ID
Window. Entering 255 allows the ID Window to stay on screen the
entire time the channel is active.
21
On-Screen Display Operations