The Id Window - CYBEX autoview 200 Installer And User Manual

AutoView 200 Installer/User Guide

The ID Window

The ID Window appears when you change channels and displays the name
of the selected channel. This window can be individually configured for
each channel in your system. The characteristics of the ID Window can be
changed from the Edit Channel Menu. This option is only available if you
are operating in non-secure mode or if you are the system administrator.
Changing the Size, Color and Position of the ID Window
1. Highlight the channel you wish to change in the main OSD Window.
2. From the main OSD Window, press the Control key twice to access the
2. Select 'Edit Channel' from the Command Menu.
3. Choose the option 'ID Setup.'
Follow the procedures outlined in the table below to change the size, color
or position of your ID Window.
Command Menu or press F3. (If you press F3 skip Step 3)
Operation
Move the ID Window
Change window background color
Change text color
Change window length
Change window size
ID Window Help
Procedure
Use the arrow keys or mouse to move the ID
Window's position on the monitor. (Hold down
the SHIFT key to move faster.) If the window
flickers but does not move, continue tapping the
arrow keys until it moves back into range.
Press the <PAGE UP> key to cycle through the
available window background colors.
Press the <PAGE DOWN> key to cycle through
the available text colors.
Use the (+) and (-) keys to change the length of
the ID Window.
Press SPACE to toggle between large and small.
Press F1
20