Basic Channel Maintenance - CYBEX autoview 200 Installer And User Manual

AutoView 200 Installer/User Guide
Basic Channel
Maintenance
Basic Channel Maintenance is performed from the Administrator
Command Menu, and is available if you are operating in non-secure
mode or if you are the system administrator. Here you can add, delete or
edit individual channels.
Adding Channels
1. Select 'Add Channel' from the Administrator Command Menu or press
2. Type in the address for the PC you are naming and press Enter. Please
3. Enter the dwell time for the ID Window and press Enter.
4. Enter the dwell time for scanning and press Enter.
5. After selecting "ID Setup", use the arrow keys, position the ID window
Press Esc at any point to exit this operation without adding the channel.
the Insert key. Type in a new channel name, up to 14 characters long,
and press Enter.
note that the address cannot be longer than two letters.
to where you would like it to appear when this channel is selected.
Then press Enter. (For further information see 'The ID Window' later
in this chapter.)
Program Manager
?
CYBEX Control Panel
Add Channel
Name
Address
ID Dwell Time 5
Scan Dwell Time 5
ID Setup
Save Changes
Games
ENTER = save ESC = exit
THE ADD CHANNEL WINDOW
18