Basic Install - CYBEX autoview 200 Installer And User Manual

2

Basic Install

1. Power down all computers that will be part of your AutoView
Connecting your Local Peripherals
2. Locate your PS/2 keyboard, VGA video monitor and PS/2 mouse.
3. Plug your VGA monitor cable into the port labeled
Basic Installation
200 system.
your AutoView 200. Plug your PS/2 keyboard cable and your PS/2
mouse cable into the ports labeled
PS/2 KEYBOARD CABLE
and
5
on the back of
respectively.
VGA MONITOR CABLE
PS/2 MOUSE CABLE