Dismantling Covers - Kärcher HDS 9/50 De Tr1 Service Manual

11.3.2 Dismantling covers

NOTE
The disassembly of the two covers is similar and is only il-
lustrated exemplarily based on the front cover.
 Push the ball head out of the retainer by slightly hitting it.
 Repeat the same procedure on the opposite side of the
gas pressure damper and exchange the gas pressure
damper.
CAUTION
Risk of damage!
Secure the cover against falling shut uncontrolledly!
Always have at least two people performing these tasks!
Consider the weight of the covers: Front cover approx.
50kg, rear cover approx. 30kg!
1 Support right
2 Hood
 Separate the gas pressure damper from the cover at
the top, see previous chapter.
 Unscrew the two screws of the holder.
1 Support left
2 Hood
 Unscrew the two screws of the holder.
English 5.906-736.0 Rev. 00 (07/15)
99