High Pressure Outlet; Uninstall / Install High-Pressure Hose; Dismantling The Pressure Gauge; Changing The Bypass Unit With Safety Valve - Kärcher HDS 9/50 De Tr1 Service Manual

11.14 High pressure outlet

11.14.1 Uninstall / install high-pressure hose

11.14.2 Dismantling the pressure gauge

11.14.3 Changing the bypass unit with safety valve

1 High-pressure hose (uncoiled)
2 Hose connection
 Unwind the HP hose from the hose reel.
 Disconnect the hose at the hose connection.
1 Screw connection
2 Manometer
 Disconnect the screw connection.
 Remove the pressure gauge.
1 Bypass unit
2 Water pipes
3 High pressure hose
NOTE
The unit is located at a console that must be dismantled to
completely unthread the bypass unit!
The following pictures show the situation without the dis-
mantled console.
English 5.906-736.0 Rev. 00 (07/15)
151