Front cover
98
English 5.906-736.0 Rev. 00 (07/15)
1 Gas pressure damper
2 Fastening bolt with ball head on the cover
3 Fastening bolt with ball head on air casing
NOTE
The piston rod is installed towards the air casing side.
1 Nut with washer
2 Splint
3 Ball head
CAUTION
Risk of damage!
Secure the cover against falling shut uncontrolledly!
Do not open the hood too far, this may damage the hood
and the appliance. Ensure that the appliance is not lifted
up with the hood. The hood fastener is not suitable for this
kind of load and can tear.
Pull the cotter out using a pointed object.