1 Safety valve
2 Pipe connection
NOTE
The pressure of the safety valve is permanently adjusted
to 6 bar and cannot be changed.
Remove both hoses from the plug connection.
Unscrew C-coupling for the water hose.
1 Screw
Open the nuts of the two hose connections.
Unscrew the screws of the console fastening.
Carefully unthread the bypass unit from the console.
NOTE
For mechanical reasons, the two nuts have different span-
ner sizes.
Upon unthreading, slide out he HP side first and then the
side with the safety valve.
Dismantled bypass unit.
152
English 5.906-736.0 Rev. 00 (07/15)