In the lower area of the float container the sensors for the
filling level monitoring (empty message) and water temper-
ature are mounted onto a joint holder.
1 Support
2 Temperature sensor
3 Filling level monitoring (empty message)
4 Inflow return line of high-pressure pump
View with opened maintenance flap on the left
1 Thermostat switch water temperature in the float con-
tainer
NOTE
When the set water temperature of 55°C in the float con-
tainer is exceeded, the motor switches off automatically.
52
English 5.906-736.0 Rev. 00 (07/15)