Toshiba Remoteye Ii Application Program; Toshiba Remoteye Ii Client Software - Toshiba RemotEye II User Manual

Hide thumbs Also See for RemotEye II:

Table of Contents

Toshiba RemotEye II Application Program

The Toshiba RemotEye II Client Software runs on servers and connects to a designated RemotEye II.

When the servers start up the RemotEye II scans for the UPS status. When UPS power events are

detected, the RemotEye II broadcasts a Shutdown command to the workstation. The Toshiba RemotEye

II Client Software will broadcast warning messages (on the screen of the servers) and then shutdown the

server gracefully.

Installation of RemotEye II Client using Windows 9x/2000/NT/XP

Insert the RemotEye II CD-ROM into the CD-ROM drive.

Run the Installer.exe program (on the CD-ROM).

A dialog box will be displayed on the screen, type in the IP address of the designated RemotEye II, its

Client Name, and its Shutdown Delay Time. Click the Def. button to enter the workstation's name as the

Client Name setting (see Figure 20: ).

Upon completion of the setup screen's entries, click OK and the RemotEye II service will connect to the

RemotEye II automatically.

Figure 20: Toshiba RemotEye II Client Software

RemotEye II User Manual – 50024-014

Table of Contents