Toshiba RemotEye II User Manual page 64

Hide thumbs Also See for RemotEye II:

Table of Contents

RemotEye II Control

This page allows the administrator to Enable/Disable the available RemotEye II communication protocols.

In addition, it allows the administrator to restart or reset the RemotEye II.

BootP/DHCP Status

This field allows the administrator to Enable/Disable the Boot Protocol (BootP)/ Dynamic Host

Configuration Protocol (DHCP) support or to view the current settings. These protocols are Internet

standards and are used to obtain a dynamic IP address from a BootP/DHCP server.

Telnet Connection

This field allows the administrator to Enable/Disable the terminal-to-server application (Telnet) control

process (i.e., telnet 192.168.7.18).

Network Upgrade

This field allows the administrator to Enable/Disable the Trivial File Transfer Protocol (TFTP) upgrade

control or to view the current setting. The Windows upgrade utility, Tugrade, may be used to upgrade the

RemotEye II when enabled.

Reset the RemotEye II to Default

This field allows the administrator to Enable/Disable the RemotEye II Reset function. When enabled, all

parameters in the RemotEye II will be reset to default setting.

Restart the RemotEye II

This field allows the administrator to Enable/Disable the RemotEye II Restart function. When enabled, the

RemotEye II may be restarted.

SNMP Version Control

This field allows the administrator to enable and disable the Simple Network Management Protocol

security level. When enable, administrators has the options to set for SNMPv1 or SNMPv3

RemotEye II User Manual – 50024-014

Table of Contents