Introduction - Toshiba RemotEye II User Manual

Introduction

Congratulations on the purchase of your new Toshiba Uninterruptible Power Supply (UPS) system
management tool: the RemotEye II! The RemotEye II supplies a 10/100 base-T network card that allows
network administrators to monitor and control Toshiba UPS systems remotely via Simple Network
Management Protocol (SNMP) and Hypertext Transfer Protocol (HTTP) methods.
This user manual describes the configuration and operation of the RemotEye II. The RemotEye II is
available as a circuit board that is inserted into the option slot of the UPS or as an external device that
connects to the UPS via a provided cable.
The RemotEye II/Internal is designed for the Toshiba UPS that has the option slot. The circuit board is
connected to the UPS via the RemotEye II/Internal card edge connector.
The RemotEye II/External is designed primarily for use with the Toshiba UPS that does not have the
extension option slot, but it may also be used in a UPS system that has an extension option slot. The
RemotEye II/External communicates with the UPS via a provided cable.
RemotEye II User Manual – 50024-014 11