Table of Contents
Advertisement
System Group
Main Menu → (1)
Toshiba RemotEye II Configuration → (1) System Group (see Figure 7: Console
System Group Menu Description).
The System Group provides access to the system settings listed below. The settings may be viewed or
changed from this screen. When using the Dynamic Host Configuration Protocol (DHCP), items 1 – 3 will
be retrieved automatically.
1.
IP Address — RemotEye II IP address.
2.
Gateway Address — The gateway IP address (if a router is necessary).
3.
Network Mask — The network mask for the RemotEye II network.
4.
Date and Time — The RemotEye II date in the MM/DD/YYYY format The RemotEye II time in
the HH:MM:SS format. RemotEye II supports the Network Time Protocol (NTP) and NTP Time
Zone features. These two features enable the UPS to synchronize its date and time with a NTP
server and with the options of daylight saving time control. (see Figure 8: Date & Time Menu
Description).
0.
Return to Previous Menu.
+====================================================================+
|
+====================================================================+
RemotEye II Agent Version : TIC RemotEye II v3.00
Ethernet address
1. Ip Address
2. Gateway Address
3. Network Mask
4. Date and Time
0. Return to previous menu
Please Enter Your Choice =>
Figure 7: Console System Group Menu Description
+=================================================================+
|
+=================================================================+
1. System Date (dd/mm/yyyy)
2. System Time (hh:mm:ss)
3. NTP Server
4. NTP Time Zone
5. Daylight Saving Time Control : Enabled
6. NTP Control
0. Return to previous menu
Please Enter Your Choice =>
RemotEye II User Manual – 50024-014
[ System Group Menu ]
: 00 E0 D8 08 80 0D
: 172.18.1.63
: 172.18.1.1
: 255.255.240.0
[ Date and Time Menu ]
: 09/24/2005
: 12:22:21
: 0.0.0.0
: -06:00
: Enabled
Figure 8: Date & Time Menu Description
|
|
29
Advertisement
Table of Contents
