Table of Contents
Advertisement
EMD Group
Main Menu → (1) Toshiba RemotEye II Configuration → (5) EMD Group (see on page 33)
The EMD Group menu provides access to the system settings listed below. The settings may be viewed
and changed from this screen.
1.
Temperature Group — The Temperature Group provides the options to setup the low and high
warning and critical points. Users also have the options to setup the hysteresis and calibration
offset from this group.
2.
Humidity Group — The Humidity Group provides the options to setup the low and high warning
and critical points. Users also have the options to setup the hysteresis and calibration offset
from this group..
3.
Alarm-1 Group — The Alarm-1 Group provides the option to setup this dry contact as normal
close, normal open, high active, low active and disabled.
4.
Alarm-2 Group — The Alarm-2 Group provides the option to setup this dry contact as normal
close, normal open, high active, low active and disabled.
5.
Device Status — The Device Status provides the options of disabled and auto. Auto will enable
the RemotEye II to auto detect the EMD that connected to it PC port.
+================================================================+
|
+================================================================+
1. Temprature Group
2. Humidity Group
3. Alarm-1 Group
4. Alarm-2 Group
5. Device Status : Auto
0. Return to previous menu
Please Enter Your Choice =>
RemotEye II User Manual – 50024-014
[ EMD Group Menu ]
Figure 12: Console EMD Group Menu Description
|
33
Advertisement
Table of Contents
