Front cover locked in place
The front door locks during certain Busy events, and unlocks when those events are complete. This is a normal
function. You can hear the door lock into place when one of these events take place. However, if the printer is
turned off, or has an error while the front door is locked (for example, while printing or calibrating), the front door
may not unlock. If this happens, turn the printer off and restart it. Once it goes through POR, it may unlock itself.
If this does not work, use the following procedure to unlock the front door:
Remove the rear cover.Remove the four screws (A) securing the rear cover.
1.
Lift up to disengage the two tabs (B).
2.
A
7526
Previous
Go Back
Diagnostic aids
3-49
Next