Basic Errors (Without Error Message) - MHM Synchroprint X-Type plus Operating Instructions Manual

9.6.2.

Basic errors (without error message)

The following error reasons are not recognized by the control system and no error message is
displayed:
Error description
It's not possible to start
the tablet m-touch pro
Safety level can't be
adjusted.
Squeegee does not
toggle at squeegee
carriage movement.
Screen lift does not
work.
Unlock screens does
not work.
Operating instructions X-Type plus V1-3.docx
Operating Instruction X-Type plus
Possible reasons
Main power switch is
switched off and battery is
empty.
"Control ON/OFF" is
switched off and battery is
empty.
Tablet isn't connected and
battery is empty.
Power supply of machine is
missing and battery is empty.
Safety key is not connected
to unit control.
Wrong wiring of safety key
at control panel housing.
Squeegee pressure too low.
No air pressure at print
station.
Valve not actuated.
No air pressure at screen lift
unit.
Valve not actuated.
Wrong low pressure
adjustment.
Valve not actuated.
Trouble-shooting
Switch on main power switch!
Switch on "Control ON/OFF"!
Connect tablet with machine control!
Reestablish power supply!
Check wiring from unit control to safety
key!
Put control panel out of housing and
check wiring of safety key!
Adjust pressure control at print station!
Is manual screen lift working? YES:
Pressure existent. No: Upper pressure stop
cock active or tube snapped off.
Check wiring of squeegee valve!
Tube snapped off.
Check wiring of screen lift valve!
Check adjustment of pressure regulator.
Check wiring lock/unlock valve!
Page 42 of 45