Squeegee Carriage - MHM Synchroprint X-Type plus Operating Instructions Manual

7.9.10. Squeegee Carriage

Squeegee height may be adjusted individually with the handwheels (pic. 1 + 2). Squeegee angle
may also be adjusted individually by the sliding levers (pic. 3). Squeegee pressure may be adjusted
with an adjusting knob located on the squeegee arm (see section 7.9.7 Squeegee carriage speed &
pressure controls).
Operating instructions X-Type plus V1-3.docx
Operating Instruction X-Type plus
The squeegee carriage is equipped
with two squeegees. Pulling the black
'quick release' knob (pic. opposite)
will release the respective squeegee.
Make sure that these locking knobs
engage fully when
squeegee. The maximum permitted
squeegee width must be observed.
loading the
Page 23 of 45