Manually - MHM Synchroprint X-Type plus Operating Instructions Manual

9.3.2.

Manually

At manual-mode with button "Start" one index and working cycle will be processed.
The following buttons are displayed:
Button
Operating instructions X-Type plus V1-3.docx
Operating Instruction X-Type plus
Functional description
Is used for the sequential start of a new print job/run. It activates each
selected print station/flash cure unit in sequence when commencing a
production run. After the first complete printing cycle with all
enabled print stations/flash cure units, the startup mode will be
turned off automatically.
Is used to switch off the print stations one by one when print job is
finished. A separate command screen will be displayed with options
Continue, Outlet and don't flood at waterbased inc.
Warming up the pallets to working temperature. For this only active
drying stations are used. Warming up is necessary to get the same
print results from the beginning.
Moves the turntable into the clean/half index position.
Start a print cycle including index. An optional foot switch provides
the same function, only the first start command must always be given
at the control panel.
Page 34 of 45