Safety Signs On The Machine; Other Valid Rules And Regulations; Intended Usage Of The Machine; Data - MHM Synchroprint X-Type plus Operating Instructions Manual

1.8.

Safety Signs on the Machine

The following safety signs are attached to the corresponding points of the machine:
Danger
The adhesive labels must be replaced if illegible (due to dirt or damage).
1.9.

Other Valid Rules and Regulations:

The customer must comply with all regulations applicable in the country where the machine is
located.

2. Intended usage of the machine

The machine is intended for the printing of substrates (usually textiles such as T-shirts, but also
paper or similar materials) by means of screen printing. The substrates are conveyed by means of
the "carrousel system". With the use of optional accessories the substrate can also be dried or
treated with other finishing techniques (e.g. flocking).
Any other use of the machine than described above may result in danger to
persons or material damage and is therefore forbidden.

3. Data

This section details the Synchroprint technical specifications.
NB: As our policy is one of continuous improvement, we reserve the right to
change specifications without prior notice.
3.1.

Serial Number and Year of Manufacture

Serial number and year of manufacture are indicated on the machine's type plate.
Operating instructions X-Type plus V1-3.docx
Operating Instruction X-Type plus
Description
Warning against squashing of parts
of the body, in particular arms or
hands.
Warning of dangerous voltage.
Location
At squeegee carriages.
At current-carrying parts of the
machine with 230/400VAC.
Page 10 of 45