How To Use The Equipment Settings Mode - NordicTrack Grand Tour User Manual

7. Follow your progress.
See step 5 on page 20. The screen may also
show a map of the route and a marker indicating
your progress. Touch the buttons on the screen to
select the desired map options.
During a race or challenge, the screen will
show your position in the race relative to other
competitors.
8. Do intervals if desired.
See step 6 on page 21.
9. Wear a heart rate monitor and measure your
heart rate if desired.
See step 7 on page 21.
10. Turn on the fan if desired.
See step 8 on page 21.
11. When you are finished exercising, unplug the
power cord.
See step 9 on page 21.
For more information about iFit features, go to
www.iFit.com.

HOW TO USE THE EQUIPMENT SETTINGS MODE

IMPORTANT: Some of the features described may
not be enabled. Occasionally, a firmware update may
cause your console to function slightly differently.
1. Select the settings main menu.
Turn on the console and select the main menu
(see steps 1 and 2 on page 20). Then, touch the
gears button at the bottom of the screen to select
the settings main menu.
Note: You can also press the settings button on the
console to access the settings main menu.
2. Select the equipment settings mode.
In the settings main menu, touch the Equipment
Settings button.
Note: It may be necessary to scroll the screen to
view all the menu options.
3. Enable or disable the auto relogin feature.
Enable this feature to have the console automati-
cally log in to your iFit account when you turn on
the power. Note: This feature is recommended for
private owners of the exercise bike only.
To enable or disable the auto relogin feature, first
touch the Auto Relogin button. Next, touch the
Enable checkbox or the Disable checkbox. Then,
touch the back button on the screen.
4. Enable or disable automatic console updates.
To enable or disable automatic console updates,
first touch the Auto Update button. Next, touch the
Enable checkbox or the Disable checkbox. Then,
touch the back button on the screen.
Note: To select a time for automatic console
updates, see step 13.
26