Using External Lus For Continuous Access Xp Operations; Example Of Auto Lun Xp Operations - HP StorageWorks XP12000 User Manual

External storage xp
Hide thumbs Also See for StorageWorks XP12000:
Table of Contents

Advertisement

For more information, see the HP StorageWorks Auto LUN XP user guide for the
XP12000/XP10000/SVS200.
Figure 14

Example of Auto LUN XP operations

1.
Use External Storage XP to map a volume in the external array to an internal LDEV of the local array.
For this example, set the following attributes for the mapped LU:
• Emulation type: OPEN-V
• IO Suppression mode: Disable
For more information, see
CAUTION:
LUN XP or Business Copy XP, as shown in
when mapping the LU. Only OPEN-V emulation can be used to read existing data in the external LU
from the local array side.
To copy existing data in the mapped external LU using HP StorageWorks software products, such as
Continuous Access XP and Business Copy XP, the mapped external LU's emulation type must also be
OPEN-V.
2.
Prepare a local array internal LDEV with the same capacity as the mapped external LU. Use Volume
Manager to adjust the internal LDEV's capacity as required. For instructions, see the HP StorageWorks
LUN Configuration and Security Manager XP user guide for the XP12000/XP10000/SVS200.
CAUTION:
3.
Set the mapped external LU as the source volume, and set the local array internal LDEV as the target
volume.
4.
Use Auto LUN XP to manually migrate existing data in the mapped external LU to the local array
internal LDEV (without changing the associated LDEV/LU).

Using external LUs for Continuous Access XP operations

Figure 15
shows an example of using an external LU for Continuous Access XP operations. The mapped
external LU is set as the Continuous Access XP pair's S-VOL, and the volume in the local array that is
connected as the MCU is set as the Continuous Access XP pair's P VOL. For more information about
"Mapping external LUs (Add
To migrate existing data in the mapped external LU to a local array volume using Auto
The emulation type of the local array's prepared internal LDEV must be OPEN-V.
LU)" on page 70.
Figure
14, set the local array's emulation type to OPEN-V
External Storage XP user guide
39

Advertisement

Table of Contents
loading

This manual is also suitable for:

Storageworks xp10000Storageworks svs200

Table of Contents