Display Filter Pane - HP xp12000 User Manual

Table 20 Status icons for Continuous Access XP operations (continued)
Icon Explanation
Suspending.
from the PAIR or COPY state to the PSUS/PSUE state.
Deleting.
the PAIR, COPY, or PSUS/PSUE state to the SMPL state.
• Sub: Suspend Sub Status.
• Grp: Sequence number of current volume is same as consistency group.
• LU: Sequence number of current volume is not same as consistency group.
• OFF: Suspended by the PS OFF by the MCU.
• S/N and ID: Serial number and SSID of the other disk array (MCU or RCU) of the volume pair.
• Port, G-ID, and LUN: Port number, group number (G-ID), and LUN of the other volume of the volume
pair. If the LU is set to more than one path, the LU specified at paircreate is displayed.
NOTE:
volume. For more information about external volumes, see the HP StorageWorks External Storage
XP user guide.
• Type: Pair mode: Synchronous or Asynchronous.
• Fence: P-VOL fence level of the Continuous Access XP volume pair: data, status, or never. See
"Considering the P-VOL fence-level
Access XP P-VOL fence-level parameter.
• Diff: Information about differential data.
• CTG: Consistency group number of the pair (only for the Asynchronous pairs).
• ErrLvl: Error level of the pair (only for the Asynchronous pairs).
• CLPR: Number and name of the CLPR to which the volumes forming the pairs belong. For more
information about CLPRs, see the HP StorageWorks XP Disk/Cache Partition user guide.
NOTE: The S/N, SSID, and Fence columns might be blank while the pair is in transition from a pair status
to SMPL. To display the latest information in these columns, refresh the pane.
NOTE: The first LDEV number of the LU is not displayed.

Display Filter pane

Click Display Filter to open the Display Filter pane, which you can use to select volumes to display on the
Volume list. You can select the G-ID, port number, CU number, pair mode, volume type, consistency group
number, port type, and pair status.
When you select the CU or port number on the CU Number/Port Number tree on the Continuous Access
XP main pane, the selection in the CU Number/Port Number tree has precedence over the specification in
the Display Filter pane. When you select the CU number or G-ID in the tree, the specification on the
52 Continuous Access XP for the XP12000/XP10000
Continuous Access XP
Continuous Access XP
If # is added to the end of an LDEV number, such as 00:3C#, the LDEV is an external
setting" on page 109 for a complete description of the Continuous
Asynchronous only. Pair is not synchronized, and is in transition
Asynchronous only. Pair is not synchronized, and is in transition from