Changing Subsystem Settings; Performing Continuous Access Xp Configuration Operations - HP xp12000 User Manual

default setting is 70 seconds. The value of the Path Blockade SIM Watch cannot be smaller than the
value of the Path Blockade Watch.
Figure 26 System Option pane

Changing subsystem settings

1. In the Continuous Access XP main pane, click Other Operation. The Other Operation pane displays the
Tree.
Click a subsystem from the Tree. The Preset List displays subsystem settings.
2.
3. Right-click the list, and select System Option. Current settings appear.
4. Select Set to close the System Option pane. Changes appear in the Preset List.
5. Verify the changes in the Preset List.
6. To change settings, right-click the Preset List, select Modify, make the changes, and close the pane. The
Preset List displays updated information.
7. To omit settings, right-click the Preset List, and select Delete. Changes are cancelled.
8. To cancel changes, right-click the Preset List, and select Delete All.
9. To display error codes, right-click the Preset List, and select Error Detail. Error codes appear on the right
of the Preset List.
10.To apply settings, select Apply (lower right of Continuous Access XP pane). To cancel the operation and
return the list to its original display, select Cancel.

Performing Continuous Access XP configuration operations

Continuous Access XP configuration operations include MCU operations, RCU operations, Continuous
Access XP Asynchronous control operations, and discontinuing Continuous Access XP operations. The
Continuous Access XP main pane
Access XP configuration operations:
• "MCU operations" on page 63 configure the MCUs for Continuous Access XP operations
• "Configuring MCU
• "RCU operations" on page 63 configure RCUs for Continuous Access XP operations
• "Viewing RCU Status (RCU
• "Registering RCUs (Add
• "Modifying RCU options (Change RCU
• "Adding and deleting logical paths for RCUs (Add Path/Delete
• "Adding and deleting SSIDs for RCUs (Add SSID/Delete
• "Deleting RCUs (Delete
• "Continuous Access XP Asynchronous
Asynchronous groups and options
• "Modifying parameters and deleting
• "Adding consistency groups (Add CT
• "Modifying consistency group options (CT Group
• "Viewing consistency group status (CT Group
62 Continuous Access XP for the XP12000/XP10000
(Figure 15 on page 48) provides access to the following Continuous
ports" on page 63
Status)" on page 64
RCU)" on page 66
Option)" on page 71
RCU)" on page 71
operations" on page 77 configure Continuous Access XP
settings" on page 77
Group)" on page 79
Path)" on page 73
SSID)" on page 74
Option)" on page 80
Status)" on page 78