KROHNE OPTISONIC 6400 Handbook page 75

OPTISONIC 6400
Pulse or frequency output Pulse or frequency output Pulse or frequency output Pulse or frequency output
Isolation
Output data
Function
Settings
Operating data
Active
Passive
08/2011 - 4000972602 - MA OPTISONIC 6400 R02 en
The output is galvanically isolated from the other circuits.
For pulse counting and/or analog output:
Volume flow, mass flow, thermal energy (requires input of temperature
(2x)
As analog output:
Flow speed, speed of sound, gain, signal to noise ratio, reliability of flow
measurement, quality of acoustic signal
Can be set as a pulse output or frequency output
For Q = 100%: 0.01...10000 pulses per second or pulses per unit volume
Pulse width: setting automatic, symmetric or fixed (0.05...2000 ms)
U = 15 VDC
nom
≤ 100 Hz:
f f f f 100 Hz: 100 Hz: 100 Hz:
max max max max
I ≤ 20 mA
open:
I ≤ 0.05 mA
closed:
U = 15 V at I = 20 mA
0,nom
≤ 10 kHz:
100 Hz < f 100 Hz < f 100 Hz < f 100 Hz < f 10 kHz: 10 kHz: 10 kHz:
max max max max
I ≤ 20 mA
open:
I ≤ 0.05 mA
closed:
U = 13.5 V at I = 1 mA
0,nom
U = 12.5 V at I = 10 mA
0,nom
U = 9 V at I = 20 mA
0,nom
≤ 32 VDC
U
ext
≤ 100 Hz:
f f f f 100 Hz:
100 Hz: 100 Hz:
max max
max max
I ≤ 100 mA
open:
I ≤ 0.05 mA at U
= 32 VDC
ext
closed:
= 0.2 V at I ≤ 10 mA
U
0, max
= 2 V at I ≤ 100 mA
U
0, max
≤ 10 kHz:
100 Hz < f 100 Hz < f 100 Hz < f 100 Hz < f 10 kHz: 10 kHz: 10 kHz:
max max max max
I ≤ 20 mA
open:
I ≤ 0.05 mA at U
= 32 VDC
ext
closed:
= 1.5 V at I ≤ 1 mA
U
0, max
= 2.5 V at I ≤ 10 mA
U
0, max
= 5.0 V at I ≤ 20 mA
U
0, max
www.krohne.com
TECHNICAL DATA
7
75