Password Tx; F-Code Tx; Communication Settings - E-Mail Encryption - Oce variolink 5022 User Manual

Use Document
!
Detail
You can specify the time only. Specify the time in hours and minutes.
You may not specify the date.

Password TX

Sends data with a password. If the recipient's Fax machine is set for closed network receptions, the sender's
Fax machine should transmit a Fax with the same password as the closed network reception password.
This function is available only when the recipient's machine has the closed network reception (password)
function.
Enter the password from the numeric keypad.

F-Code TX

Sends data to the specified box of the recipient by entering the SUB address and Sender ID. There are the
following two types of special boxes.
Confidential transmission
- Sends data to the confidential transmission box of the recipient. Enter the box number as SUB address,
and the confidential transmission password as Sender ID.
Relay transmission
- Sends data to the relay transmission box when the recipient has the relay distribution function. Enter
the relay box number as SUB address, and the relay transmission password as Sender ID.
!
Detail
The recipient needs to have the F-code function to use an F-code.
6.5.22

Communication Settings - E-Mail Encryption

This parameter appears when "S/MIME Communication Settings" (under "E-Mail Settings" under "Network
Setting" under "Administrator Setting") is set to "ON". Specifies whether or not to encrypt E-Mail messages
for transmission.
Note
For details on the S/MIME communication settings, refer to the User's Guide [Network Administrator].
VarioLink 5022/VarioLink 4222/VarioLink 3622
6
6-40