Cavity Cover Assembly - Viking VCSB542 Service Manual

Service Diagnostics and Procedures
To avoid risk of electrical shock, personal injury, or death, disconnect electrical power to unit using power
switch before servicing. Wires removed during disassembly must be replaced on proper terminals to insure
correct earth ground and polarization. After servicing, reconnect power using power switch.

Cavity Cover Assembly

1. Remove screws securing upper dispenser.
2. Disconnect wiring harness and remove cavity
cover.
Upper Dispenser
© 2010 Viking Preferred Service
Wiring Harness
WARNING
3. Replace switch assembly if necessary.
4. Reverse procedure to reinstall.
Switch Assembly
71