Download  Print this page

Setting Freezer Temperature Offset - Viking VCSB542 Service Manual

Built-in side-by-side refrigerator/freezer.
Hide thumbs

Advertisement

Diagnostics
Mode B Functions (continued)
Freezer Temperature Offset Calibration
The default setting for the freezer thermistor on a new unit depends on the type of Side-by-Side unit. A 42"
and 48"dispenser model is indicator 3 while a 42" and 48"non-dispenser model is indicator 4. A replacement
Low Voltage Board comes set with a default of 5. If the settings are incorrect, it will need to be changed for
proper operation.
The chart below shows the proper offset settings for the various Side-by-Side models for the Freezer
Thermistor.
Indicator
1
Offset
+8
+6
In Service Mode B, the Frz temp light will be illuminated. Depending on the type of Side-by-Side; bar 3 or 4
will be illuminated. The High Temp and the blue LED to the left of the Max Ref indicator will be illuminated.
3
4
If the proper offset setting for the model being serviced is not correct, use the Higher or Lower pad to set the
proper Freezer Offset as shown in the chart above.
© 2010 Viking Preferred Service
2
3
4
5
+4
+2
0
48"D
48"
42"D
42"
6
7
8
Coldest
-2
-4
-6
-8
32

Advertisement

Table of Contents

   Related Manuals for Viking VCSB542

Comments to this Manuals

Symbols: 0
Latest comments: