Viking VCSB542 Service Manual page 62

Service Diagnostics and Procedures
To avoid risk of electrical shock, personal injury, or death, disconnect electrical power to unit using power
switch before servicing. Wires removed during disassembly must be replaced on proper terminals to insure
correct earth ground and polarization. After servicing, reconnect power using power switch.
Freezer Evaporator Fan–Non Dispenser
Models
1. Remove lower freezer baskets.
2. Remove screws securing left and right freezer
glides and remove glides.
Freezer Glides
3. Remove right side light lens (see interior lights
page 53).
Light Lens
© 2010 Viking Preferred Service
WARNING
4. Remove screws and center evaporator cover.
Evaporator Fan Cover
4. Disconnect wiring, and repair/replace freezer
fan.
5. Reverse procedure to reinstall.
Evaporator Fan
62