Freezer Evaporator Fan - Viking VCSB542 Service Manual

Service Diagnostics and Procedures
To avoid risk of electrical shock, personal injury, or death, disconnect electrical power to unit using power
switch before servicing. Wires removed during disassembly must be replaced on proper terminals to insure
correct earth ground and polarization. After servicing, reconnect power using power switch.
Freezer Evaporator Fan–Dispenser Models
The unit uses a fan motor to pull air over the
evaporator coil and circulate it through the unit.
1. Remove ice bucket.
2. Remove screws securing evaporator fan cover
and remove panels.
3. Remove screws and fan bracket.
Fan Bracket
© 2010 Viking Preferred Service
WARNING
Evaporator Fan Cover
4. Remove screws and evaporator motor cover.
Evaporator Motor Cover
5. Disconnect wiring, and repair/replace freezer
fan.
Evaporator Fan
6. Reverse procedure to reinstall.
61