Diagnostics
Special Features (continued)
Sabbath Mode Feature for Sabbath Observance
Before the Sabbath mode is engaged, the bale arm of the ice maker needs
to be raised until it clicks into the detent. This turns off the power to
the ice maker.
Enter Sabbath Mode
To enter Sabbath mode, press the "ACTIVATE CONTROLS" pad to activate the control panel. Then, press and
hold "ACTIVATE CONTROLS" and "DISPLAY OFF" pads simultaneously for three seconds.
The control will beep three times and illuminate the 3 right blue squares to alert the user that Sabbath Mode
has been entered. When the control enters Sabbath Mode, it will disable the interior lights, display (excluding
the 3 right hand blue squares), and alarm enunciators.
Power Loss
If power loss occurs in Sabbath Mode and the control experiences a long power loss, it will return to Sabbath
Mode when power is regained.
Exit Sabbath Mode
To exit Sabbath Mode the user must press and hold "ACTIVATE CONTROLS" and "DISPLAY OFF"
for 3 seconds.
The control will beep three times alerting the user that Sabbath Mode has been exited. The control will return
to normal mode.
Once the unit is back in normal mode, the bale arm of the ice maker needs to
be pushed down until it is no longer in the detent position. This will restore
power to the ice maker.
© 2010 Viking Preferred Service
Ice
Maker
Arm
OFF
Position
Ice
Maker
Arm
On
Position
36