D Fitting & Removing The Discs - Cuisinart FP16DCU Manual

D Fitting & Removing the Discs
N.B. The shredding and slicing discs can only be used with the large or medium work bowl.
Plug in the appliance and fi t the work bowl(s) as described in section A.

N.B. Never put disc on motor spindle until the work bowl is locked in place.
When using your medium or large bowl only, place the stem adapter over the motor shaft

and push down. Choose the desired disc and place it on the stem adapter matching up
the opening.
If using the adjustable slicing disc, use the rotating hub and indicator markings to

select slicing thickness you can slice between 1-6mm. Finger holes are also provided for
inserting and removing of this disc.
If using the reversible shredding disc, determine whether the fi ne or medium side will be

used and place down appropriately, using the fi nger holes.
Fit the lid and pushers as described in section A and B.

N.B. Always wait for the disc to stop moving before removing the lid.
13