Instructions For Use; A Fitting & Removing The Parts - Cuisinart CH4DCU Instructions For Use Manual

Instructions For Use

A Fitting & removing the parts
1. Place the housing base on a fl at, dry, stable surface.
2. Place the work bowl over the motor base with the handle facing forward.
N.B. Opening at back of bowl must face column at back of mini processor.
3. Turn the bowl in an anticlockwise direction until it locks into position on the housing base.
4. Carefully lift the blade assembly, holding the central plastic stem and place over the motor spindle. Push
the blade down until it clicks into place. The lower blade of the blade assembly should almost touch the
bottom of the work bowl.
5. To remove blade, pull up and away using gentle force.
N.B. Always hold the blade assembly from the plastic stem. Never touch the blade it is very sharp.
N.B. Never place the blade on the motor shaft until the work bowl is locked into place.
N.B. Always insert the blade in the work bowl before adding ingredients.
9