E Touch Pad Controls - Cuisinart FP16DCU Manual

E Touch Pad Controls
Once you have correctly fi tted the chosen attachment, work bowl, lid and pushers, place
the ingredients in the work bowl or feed tube and use one of the following controls to
start the motor.
ON/OFF

The ON and OFF controls allow you to stop and start the motor. Add ingredients to the
work bowl, either through the feed tube or directly into the bowl. Press the 'ON' button
and the blue LED light will illuminate and the motor will start. Press the 'OFF' button
when fi nished and the motor will stop.
N.B. The machine will not start operating until the large pusher is correctly inserted (refer
to section B). It stops instantly when the large pusher is removed.
Pulse

The pulse button allows you to control the motor operation for shorter periods of time.
When pressed, the motor will run until the button is released. The blue LED light will
illuminate each time you press the pulse button. Use the pulse function at the start of
processing a few times before using the 'ON' button to continuously process for a smooth
consistency.
Dough

The dough control is used with the dough blade. This control is specially designed to run
at an optimum processing speed for mixing and kneading dough and gives results in a
fraction of the time it takes to do it by hand. Press the 'DOUGH' button and the blue LED
light will illuminate. It is now ready to knead the dough. Press the 'OFF' button when
fi nished.
N.B. Only use the specially designed dough blade to knead dough. Kneading dough should
only be done in the large work bowl.
15