Table of Contents
Advertisement
C
Fitting and Removing the Reversible Slicing & Grating/Shredding Discs
The reversible slicing and grating/shredding discs can only be used with the large
work bowl.
Set up the large work bowl as directed in 3A.
n
Choose the desired disc and place it on the motor spindle, ensuring the text for the
n
function you wish to use is facing upwards on the disc (see section 2 for your reference).
Slowly twist until the disc and spindle grooves align; the disc will fall into place.
n
N.B. Never put either disc on the motor spindle until the work bowl is locked in place.
To remove, carefully lift the disc upwards and away from the motor spindle.
n
WARNING: Take great care when handling either disc; the slicing blades are sharp
and can cause injury.
Place disc on
motor spindle
11
Advertisement
Table of Contents
