Reassigning The Sunny Home Manager To The Sunny Portal System After The Reset - SMA sunny home manager User Manual

SMA Solar Technology AG
2. Select [Next].
☑ The page User registration opens.
3. Activate the checkbox I am already registered in Sunny Portal.
4. Enter the e-mail address and the Sunny Portal password in the fields E-mail address and
Password.
5. Select [Next].
☑ The page Select PV system opens.
6. Activate the field Add or replace devices.
7. Select in the line of the Sunny Home Manager system for which you want to replace the
Sunny Home Manager.
8. Select [Next].
☑ The page Select devices opens.
9. Enter the serial number of the Sunny Home Manager in the field PIC. Enter the registration ID
of the Sunny Home Manager in the field RID.
10. Reading off the serial number and registration ID
You can read off the serial number and the registration ID at the following locations:
• On the type label at the back of the Sunny Home Manager
• On the label included in the delivery
11. Select [Identify].
☑ Sunny Portal checks whether the serial number and registration ID correspond to the
connected Sunny Home Manager.
✖ The PV System Setup Assistant cannot find any Sunny Home Manager with the serial
number and registration ID?
An error has occurred.
• Eliminate the error (see Section 15, page 127).
12. Select [Next].
13. Select [Finish].
10.4 Reassigning the Sunny Home Manager to the
Sunny Portal System after the Reset
Once you have completely reset the Sunny Home Manager (see the installation manual of the
Sunny Home Manager), you must reassign the Sunny Home Manager to your
Sunny Home Manager system in Sunny Portal. Otherwise, Sunny Portal will not accept any data
from the Sunny Home Manager.
If you have reset the Sunny Home Manager and redetected the Plugwise radio-controlled sockets,
you must reestablish the connection to the Plugwise Stretch (see the Sunny Home Manager
installation manual).
User Manual
10 System Management
HoMan_Portal-BA-en-20 97